Tag: Bloomingdale Trail

Pervasive Divvy station maps offer big opportunity to show people around Chicago, but need major changes

A man looks at one of the first five stations installed, at State and Randolph (but the board says State and Lake). 

Navigation maps on Divvy bike sharing stations will be placed at 400 locations around the city. A map this pervasive, to be read and interpreted by hundreds of thousands of locals and visitors to Chicago (including people who will never use Divvy), should have a design that communicates good routes to ride, and important places like train stations, nearby Divvy stations, points of interest, and where to find places to eat or be entertained.

The design of the maps on the station boards needs to be improved. The first issue I noticed in June is that streets and alleys are given equal significance in their symbology, possibly confusing people on which route to take. The map should strip alleys, offering room for more info on the map, like useful destinations. It may be easier for some to locate the Art Institute of Chicago as a labeled, light-gray block instead of trying to locate its address on the map (nigh impossible). When one locates the destination, one can more easily locate the nearest Divvy station.

The map at North/Clybourn’s station (actually on Dayton Street) covers a large portion of the map with the “you are here” label and lacks the connection between North Avenue and Goose Island. 

I’ve noticed that the “you are here” labels cover up train station markers/labels, and the loop elevated tracks are missing (a common reference point for Chicago). It takes a moment to realize that the white text is labeling the CTA stations and not the nearby Divvy stations. It’s unclear where “you are here” points to, until you realize that it’s at the center of the blue 5-minute walking circle. Dearborn Street is symbolized as a bike lane, but not labeled as a street. Clark Street and State Street are doubly wide, but the meaning of that is unknown. The legend is useful to distinguish bike lane types but is placed far from the map, at the bottom of the board.

Here are other areas where the boards and maps should be redesigned:

  1. The “service area” map has low utility in its current form as it’s not labeled with streets, points of interest, or a time or distance scale. It appears as a reduced-boundary blob of Chicago. It could be improved if it communicated “this is where you can go if you take Divvy” and label streets, train stations, and points of interest at the edge of the service area. 
  2. The 5-minute bike ride map is nearly identical to the 5-minute walk map, but smaller. The 5-minute walk map should be made larger and integrate the now-eliminated 5-minute bike ride map.
  3. Much of the text is unnecessarily large. The CTA station labels are so large in comparison to the streets that it’s not clear where on the block the stations are located. CTA stations are labeled but the train routes aren’t always shown (Loop stops are just gray); it’s not even clear that they’re CTA stops.
  4. The purpose of the blue circle isn’t labeled or clear: the larger map, titled “5 minute walk”, shows a large map but there’s a blue circle – is the blue circle or the square map the 5-minute edge? The connection between the title and the blue circle could be tightened by using the same color for the text and the circle or by wrapping the text around the circle path.
  5. The map, which is likely to serve as a neighborhood “get around” and discovery map for tourists, and even locals, lacks basic info: there are absolutely no destinations marked, no museums, parks, etc.
  6. The bike lane symbology doesn’t match the Chicago Bike Map, which uses blue, purple, orange, and red to denote different bike lane types, and hasn’t used green for at least seven years. The use of green makes them look like narrow parks.
  7. The map designers should consider placing the city’s cardinal grid numbering system to enable readers to find an address.
  8. North/Clybourn’s Divvy station map lacks a bikeable connection from North Avenue to Goose Island via the Cherry Avenue multi-modal bridge. The maps should be reviewed for street network accuracy by people who live and ride nearby.

Photo shows the original board and map at the Milwaukee/Wood/Wolcott station, which has since moved. The station on this map marked at Marshfield/North was moved to Wood/North this week. 

There are many opportunities for the map to change because they will have to be updated when stations are moved, for both the moved station and the handful of station boards that include the moved station. At least four boards needed to be updated when the station at Milwaukee/Wood/Wolcott moved from Milwaukee Avenue (next to Walgreens) to Wood Street (across from the Beachwood). The maps for Citibike in New York City don’t share these design flaws.

The Citibike station boards and maps were designed by Pentagram, a well-known design firm, with whom the city has a longstanding relationship, designing the new wayfinding signs for neighborhoods, the “LOOK” anti-dooring decal for taxi windows, and the bus station maps. One of the key differences between the Citibike and Divvy maps is the text label size, the symbol label size, and the presence of building outlines (that other huge group of things that defines a city, contrasting the roads-only view on the Divvy map).

A close-up view of a Citibike map. Photo by Oran Viriyincy. 

N.B. More trips are currently taken by tourists and people with 24-hour memberships than people with annual memberships. I question the bikeway symbology and suggest that the streets have three symbols: one representing a bike lane (of any kind), one representing sharrows (because they are legally different from bike lanes) and one representing a street with no marked bikeways. The current bikeway symbology may not be understandable by many visitors (or even understood by locals because of differing definitions) and show a jumble of green hues whose meanings are not clear or even useful. It’s not currently possible to take a route on a bicycle that uses only protected bike lanes, or uses protected bike lanes and buffered bike lanes, so the utility of this map as a route building tool is weak. One wastes their time looking at this map in the attempt to construct a route which uses the darkest green-hued streets.

I also recommend that the board and map designers give Divvy CycleFinder app messaging greater prominence. I believe that a majority of users will be searching app stores for appropriate apps. When you search for Divvy, you’ll find eight apps, including my own Chicago Bike Guide.

Updated 22:43 to clarify my critique and make more specific suggestions for changes. 

Dutch biking is better than all other kinds

Yonah Freemark, famous person behind The Transport Politic and now a semi-famous person at Metropolitan Planning Council (shut down the Illiana, Yonah!), needed a ride from the Damen Blue Line station for a special Vancetour of the Bloomingdale Trail. The Dutch way of biking is extremely social, both because of the way bicycles are built and the way the infrastructure is built. That style is rare in America, and even downright anti-social and hostile in many places. For starters, there’s not enough room to ride side-by-side (in Chicago it’s illegal outside of too-narrow bike lanes).

The WorkCycles Fr8, my main bicycle, is built like a tank. Some may call it the Mercedes G-Class SUV of bicycles. I called it a Cadillac to some guy outside City Hall – referring to how comfortably it rides – and he said “They suck, it’s a Mercedes.” (He was German and I don’t think either of us knew any Dutch car manufacturers.)

Thank you, Ryan Lakes, for the photos.

Beautiful renderings of what Bloomingdale Trail will look like in a decade

The easiest place to get on the Bloomingdale Trail now will remain the easiest place. This access point will have three entry points, two of them are ramps. 

I say a decade because that’s how long it will take for all the plants and landscaping on the Bloomingdale Trail elevated park to look like how it appears in these fancy renderings by Michael Van Walkenburg & Associates.

Western Trailhead at Ridgeway Avenue pops up 10 feet above the trail level, over 20 feet above ground level. 

See all the photos from the meeting last Monday. Read my high praise for the project and the planning process on Grid Chicago.

Using Google Fusion Tables to create individual Chicago Ward maps

I wanted to create a map of the 35th Ward boundaries using Google My Maps for a story on Grid Chicago. I planned to create this by taking the Chicago Wards boundary shapefile and exporting just the 35th Ward using QGIS into a KML file. I ran into many problems and ended up using Google Fusion Tables as the final solution.

The problems

First, QGIS creates invalid KML files. Google Earth will tell you this. I opened the KML file in a text editor and removed the offending parts (Google Earth mildly tells you what these are; you can use this validator to get more information).

Second, Google My Maps would not import the KML file. I tried a different browser and a different KML file; a friend ran into the same issue. I reported this problem to Google.

The solution

I uploaded to Google Fusion Tables a KML file containing all wards. I did this instead of uploading the single Ward because, like a database, I can filter values in the column, selecting only the row I want with “ward=35”.

After applying the filter, the map will show the boundary for just that ward. I grab the HTML code for an embeddable map and voila, the article now displays an interactive map of the 35th Ward.

Whenever I want to create a map for a different ward, I go back to this Fusion Table, make a new filter and copy the new HTML code.

A screenshot of the embedded map, showing just 1 of 50 wards, in the Grid Chicago article. 

Elsewhere

I had the same problems with QGIS exporting and uploading the KML files to My Maps the other day when I was creating maps for the abandoned railroads for Monday’s Grid Chicago article. Not thinking about Fusion Tables, I drew on the map with my mouse the lines.

Screenshot of the map of abandoned railroads.