Tag: Alderman Reilly

Logan Square McDonald’s crash map

December 21, 2011 / / 0 Comments

This is part of a series of articles on the issue of lifting the pedestrian street designation on a part of Milwaukee Avenue in Logan Square so that the McDonald’s franchise owner can demolish the building, build a new building, and build a double order point (“tandem”) drive through. Read the first post. 

At the hearing on December 13, 2011, Alderman Reilly asked if there was evidence of injuries or crashes due to the drive through. No one brought this data to the hearing. I cannot directly attribute the crashes to the existence of the drive through (unless I had the original crash reports), the drive through probably generates traffic that would not be there without the drive through, and it causes people to have to turn across a lane of traffic, either to enter the driveway on Milwaukee, or when exiting the driveway onto Sawyer, or when turning onto Milwaukee from Sawyer. I am looking for studies that research the impacts of drive throughs at fast food restaurants and pharmacies.

37 people were involved in 13 crashes within 100 feet of the center of the McDonald’s driveway from 2007-2010. Seven people were injured, one was a pedestrian. Double the search radius to 200 feet and we see 87 people involved in 35 crashes. Now, four pedestrians and cyclist were injured in addition to the 10 drivers and passengers injured.

Download the data in this map. View a larger map. 

This was my testimony at the zoning committee hearing (this may not be verbatim, but it’s really close):

Hello, my name is Steven Vance. I work as a consultant and writer on sustainable transportation advocacy and planning projects. The text amendment to modify the pedestrian street designation may negatively impact the continuity and safety in traffic of all modes along Milwaukee Avenue, which happens to be the city’s most popular bike route.

I ask that McDonald’s provide a traffic impact study before this matter is discussed further.

Lynn, a Logan Square neighbor, describes more of what happened at the hearing, as well as the next step at the Zoning Board of Appeals.

Here’s a map of all pedestrian streets in Chicago. View larger map.

Download a KML file of all the pedestrian streets. Download the shapefile of all the pedestrian streets. Thank you to Azad Amir-Ghassemi and Bill Vassilakis for their help in digitizing the table of pedestrian streets in the zoning code.

Update January 10, 2013

Driving danger

Crash data from the Illinois Department of Transportation show several crashes along Milwaukee Avenue from 2005 to 2011. If this location hadn’t been removed from the P-Street ordinance, McDonald’s would have been required to install both the drive-thru’s entrance and exit on Sawyer, where there is markedly less traffic than on Milwaukee (or not build them at all). This project has not only allowed a documented hazard to persist (despite the P-Street designation), but perhaps to be worsened.

From 2005-2011, there were 3 bike-automobile crashes and 5 pedestrian-automobile crashes within 200 feet of the drive-thru entrance, which includes the intersection of Sawyer and Milwaukee (where many people will drive back onto Milwaukee from the drive-thru exit). There were 82 car-car crashes in the same period. At a nearby intersection, Milwaukee/Dawson, an intersection with a similar retail makeup and traffic count, shows about half the number of crashes.

Bike box, another first on Kinzie Street

June 7, 2011 / / 39 Comments

Update June 7, 2011: CDOT and Mayor Emanuel acknowledge the project with a Tuesday morning press conference. Here’s the press release (that doesn’t reveal anything we don’t already know) and photos from the event. NBC Chicago has video from the press conference (2:27).

A bike box is a well-marked area where bicyclists can queue at signalized intersections ahead of cars, a way to get ahead and make bicyclists more visible to drivers. The Chicago Department of Transportation (CDOT) installed one Tuesday morning, on Day 2 of the Kinzie Street protected bike lane project (read about Day 1). I asked a CDOT worker if it will be painted green or another color and they replied it would probably would. It appears that the design for the project is still being done while construction proceeds. I expect a section of the next block will be worked on tomorrow.

See a bike box in Portland.

More new information about this project

CDOT was also grinding out pavement markings on Kinzie Street in front of Jewel-Osco, where the CDOT worker explained a left-turn lane would be created for westbound travelers (matching the left-turn lane in the eastbound direction next to the bike box).

The uphill bike lane will not be protected. Chicagoist commenter BlueFairline pointed out a conflict with trucks delivering goods via hose to the Blommer chocolate factory. The truck needs to be curbside. Today confirmed how this would work out.

Lastly, the CDOT worker could not confirm if there will be a bike-only left-turn lane on southbound Milwaukee at Kinzie Street, as I suggested earlier.

First photos of protected bike lane on Kinzie Street

June 6, 2011 / / 0 Comments

As I suspected, construction began today, Monday, June 6, 2011, on Chicago’s first 0.5 miles of protected bike lanes at Kinzie and Desplaines.

Chicago Department of Transportation employees were out on the street this morning striping the bike lane and bike lane buffer, as well as a painted “median” at the start of the bike lane that will presumably keep out automobiles.

Looking east on Kinzie from Desplaines, down hill. More photos.

Looking west on Kinzie from Jefferson, up hill. More photos.

The configuration is probably a 5-feet bike lane, 3-feet buffer zone (which will soon have soft-hit bollards), 8-feet car parking lane, and 10-feet travel lane. As of 9:30 AM this morning, when the photos were taken, crews had not worked on westbound Kinzie Street.

More

Chicago’s first protected bike lane to go in on Kinzie Street

June 4, 2011 / / 0 Comments

Updated June 5, 2011: New information obtained from the alderman’s email newsletter; new design suggestions added based on comments. Please read the discussion in the comments below or the discussion on The Chainlink.

Tony Arnold of WBEZ reported Saturday morning, seemingly based on Alderman Reilly’s latest newsletter (see below for excerpt), that Kinzie Street will be the location of the city’s first protected bike lane.

OLD: He didn’t mention the extents but I bet on the west end it will be at Milwaukee Avenue and Desplaines Street (see photos of this intersection below), where thousands of bicyclists per day come downtown from Milwaukee; on the east end it would be either Wells Street (a one-way, southbound street), which has a treated metal grate bridge and bike lane, or State Street (a two-way street), where the bridge is completely covered in concrete. To Wells Street is 0.53 miles, and to State Street is 0.84 miles, using the measurement tool on Google Maps.

NEW: The extent is from Milwaukee Avenue and Desplaines Street to Wells Street, a distance of 0.53 miles.

I’m excited that the Chicago Department of Transportation (CDOT) chose a good location, even though I don’t think this location meets either of my two criteria: that it attract new people to bicycling for everyday trips and that it reduce the number of crashes. It will do both, but only because that is intrinsic of this kind of infrastructure. The kind of bikeway will have more effect on this than the location. People who will use this protected bike lane are already cycling on Kinzie Street and there’re very few crashes here (there were 6 in 2007-2009).

So what makes Kinzie Street in River North a good location?

  • People will be riding and using it from Day 1. It’s a place where people are already riding. After a month, and after a year (heck, after three years), no one will be able to complain of its lack of use. For detractors, this is a main point used to advocate for bikeway removals.
  • There are low barriers to implementation: there’s a very supportive Alderman, the road is wide, and low automobile traffic (this is my observation; there’re no traffic counts recorded on the City’s website).

While I’m sure that CDOT planners and engineers have been working at a furious pace since May 16th to get this new bikeway designed and ready to install, I have a couple suggestions I hope they will consider slipping into the project plan to make it even better:

Intersection design

Problem 1: Improve the intersection at Milwaukee, Desplaines, and Kinzie. Going southbound on Milwaukee at this intersection, you are presented with two lanes. One that is “left turn only” and has a left turn signal, and one wide lane that is for “straight”. But there are three directions to go. One can turn right onto Desplaines, turn left onto Desplaines, or go straight with a slight left into Kinzie. In which lane do you position yourself and which signal do you follow? Actually, which signal to follow is easier because there’s a green right-turn light, and a regular through light. It’s really the lane and positioning that matters.

Possible Solution: This could be made more clear with a bike-only left turn lane (like this one at Milwaukee/Canal/Clinton) with a bike signal head (not sure if a bike-only phase in the signal cycle will be necessary).

Problem 2: Drivers in the right-most northbound lane on Desplaines may try to turn right into Kinzie and this will cause conflicting movements with bicyclists entering Kinzie from Milwaukee.

Possible Solution: Ban right turns on red at this corner (but probably all corners) and enforce the ban.

Slippery bridge

Problem: The bridge over the Chicago River has an open metal grate deck – these are very dangerous for bicycling, especially when wet.

Possible Solution: Treat them. Use concrete infill, non-slip metal plates, or non-slip fiberglass plates.

New route signage

Problem: The signed bike route signage is too late for bicyclists to base their turn decision on. The sign is at the intersection (see photo) and those who want to turn left towards Wells Street will then have to make a box turn instead of being able to make a left turn from the left turn lane.

Possible Solution: Install two signs, one before and one after the railroad viaduct which is north of this intersection along Milwaukee. The signs should say reach Wells Street via the Kinzie Cycle Track and position yourself in the left turn bike lane.

Bridge gap

Problem: The bridge seam on Desplaines at the south end of the intersection is extremely wide and deep. While not part of Kinzie, this problem could be fixed in the same project.

Possible Solution: Without reconstructing the bridge seam, I’m not aware of what can be done.

One more idea

Install a bike box at the intersection at westbound Kinzie at the top of the hill.

Where thousands of bicyclists will probably start their journey on the Kinzie Street protected bike lane.

I took this photo to try to demonstrate the confusion of where to position one’s self at the edge of the intersection if you want to travel “straight” into Kinzie Street (with a slight left). Do you put yourself in the left turn lane, or just to the right of the left turn lane?

This is history in the making – for Chicago only, of course. (These cities already have protected bike lanes.) Keep your eyes peeled for subsequent construction.

Excerpt about the lane from Alderman Reilly’s newsletter

Construction of the Kinzie cycle track is proposed to begin next week, and is expected to be completed by Chicago’s Bike to Work Day on June 17th. The Kinzie cycle track will introduce features that have not been seen to date with Chicago bike lanes, including:

  • flexible posts (delineators) to separate the bike lane from motor vehicle traffic;
  • pavement markings through intersections to indicate cyclist travel;
  • special pavement markings and signage; and
  • parking shifted off curb to provide additional buffer between cyclists and traffic. [It would be nice to know