Category: Roadways

The Chicago Way: The Fullerton sinkhole

September 10, 2014 / / 2 Comments
the sinkhole before repair

The sinkhole before repair. Image from Smith’s newsletter.

In Alderman Michele Smith’s e-newsletter today is a story about #TheChicagoWay, which is that special way of fixing the streets we embrace in Chicago, despite our apparent disgust for low-quality infrastructure.

“Sometimes we really have to persist to get something fixed.” Here’s the story:

A deep sinkhole had formed at approximately 444 W. Fullerton Parkway, creating a significant public safety concern for both pedestrians and motorists. But no city department would repair it until we determined which agency was responsible.

So we called upon each potential agency, leading to almost a dozen separate site visits by various inspectors between July and August. We finally discovered that this site had been an old Commonwealth Edison utility area. The abandoned vault had deteriorated, resulting in the sinkhole.

I am happy to report that Commonwealth Edison filled in the old vault and restored the street. Success!

I would definitely call a sinkhole fix that happens within three months a success.

How would it work for you and your job security if it took two months to find who’s responsible for a known bug?

Other ways to identify #TheChicagoWay:

  • There is a cone or sawhorse-style barrier INSIDE of a hole. And then you’ll see that thing fall deeper into the hole and a new thing will be added.
  • For bigger holes, there are “safety” barriers INSIDE the hole instead of AHEAD of the hole.
  • How do you identify #TheChicagoWay in the context of streets?
after the sinkhole repair

The sinkhole and pavement after repair. Image from Smith’s newsletter.

Playing around with Chicago data: who’s running red lights?

August 2, 2014 / / 5 Comments
Range Rover with Illinois license plate "0"

A Range Rover with Illinois license plate “0” is seen moving 40 MPH in a 30 MPH zone through a red light at Ashland and Cortland.

I’m just seeing who’s driving around Chicago one night, using the Tribune-published dataset of over 4.1 million tickets issued from red light cameras.

The City of Chicago has installed at least 340 red light cameras since the mid-2000s to reduce the number of people running red lights and crashing. They’re supposed to be installed at intersections where there’s a higher-than-average rate of right angle (“T-bone”) crashes, which are more injurious than other typical intersection crash types.

Assessing safety wasn’t the Tribune’s story angle, though. It was about showing spikes in the number of tickets issued, which I verified to some extent. The article called the tickets issued during these spikes “undeserved” and “unfair”. The data doesn’t have enough information to say whether or not that is the case; a video or extensive photo review is necessary to rule out rolling right turns while the light was red (a much less dangerous maneuver unless people are trying to cross the street).

The first query I ran assessed the number of people who get more than one ticket from a red light camera. Since I was tired my query was a little sloppy and it missed a lot of more useful order choices and didn’t select the right fields. I fell asleep and started again in the morning. This time, I got it right in just two tries – I needed to try again because I mistakenly put HAVING before the GROUP BY clause.

Here’s the first query, in its final form, to retrieve the number of tickets for each license plate in each state (I assumed there may be identical license plates among states).

select max(ticket_number), max(timestamp), license_plate, state, count(*) AS count FROM rlc_tickets group by license_plate, state HAVING count(*) > 1 order by count DESC NULLS LAST

It resulted in 851,538 rows, with each row representing a unique license plate-state combination and the number of red light violations that combination received. You can reasonably assert that cars don’t change license plates more than a couple times in a single person’s ownership, meaning you can also assert that each row represents one automobile.

851,538 vehicles, which make up 35.1% of all violators, have received 2,601,608, or 62.3%, of the 4,174,770 tickets. (There are 2,424,700 license plate-state combinations, using the query below.)

select count(ticket_number) from rlc_tickets group by license_plate, state

Here’re the top 10 vehicles that have received the most violations:

  1. SCHLARS, IL, 78
  2. 9720428, IL, 59
  3. 8919589, IL, 57
  4. A633520, IL, 52
  5. 3252TX, IL, 45
  6. A209445, IL, 44
  7. N339079, IL, 44
  8. X870991, IL, 41
  9. 239099, IL, 41
  10. 4552985, IL, 40

The next step would be to design a chart to show these vehicles’ activity over the months – did the vehicles’ drivers’ behavior change, decreasing the number of red light violations they received? Did the vehicle owner, perhaps a parent, tell their child to stop running red lights? Or has the vehicle owner appealed erroneously-issued tickets?

When I ran one of the first, mistaken, queries, I got results that put license plate “0” at the top of the list, with only nine tickets (license plates with two or more zeros were listed next).

I googled “license plate 0” and found a 2009 Tribune article which interviewed the Range Rover-driving owner of license plate “0” and the problems he encountered because of it. The City of Chicago parking meter enforcement staff were testing new equipment and used “0” as a test license plate not knowing such that license plate exists. Tom Feddor received real tickets, though.

I then looked up on PhotoNotice the license plate and ticket violation number to find, indeed, the license plate belonged to someone driving a Range Rover at Ashland Avenue and Cortland Street on July 17, 2008. An added bonus was Feddor’s speed in that Range Rover: the camera recorded the car going 40 MPH in a 30 MPH zone.

I was done browsing around for the biggest offenders so next I wondered how many tickets were issued to vehicles licensed in Arizona, where U-Haul registers all of its nationwide vehicles. Arizona plates came in 29th place for the greatest number of tickets.

select count(*) AS count, state from rlc_tickets group by state order by count DESC NULLS LAST

As you may have expected, four surrounding Midwest states, and Ohio, rounded up the top five states after Illinois – but this isn’t notable because most visitors come from there and they each only comprise less than 1.3% of the total tickets. The next state was Florida.

  • 3,986,739, IL
  • 51,104, WI
  • 40,737, MI
  • 27,539, IN
  • 8,550, OH
  • 7,684, MN
  • 7,139, FL

What’s next: I’m working on finding a correlation between the number of reported crashes, and type, at intersections with red light cameras and the number of tickets they issued. I started doing that before running the numbers behind this blog post but it got complicated and it takes a long time to geospatially compare over 500,000 crash reports with over 4.1 million red light tickets.

What else do you want to know?

I will delete all comments that don’t discuss the content of this post, including comments that call red light cameras, or this program, a “money grab”.

Red light camera ticket data insufficient to find cause for spikes

July 31, 2014 / / 1 Comment
Spike in tickets issued at 119th/Halsted in May and June 2011. Nodes represent tickets grouped by week.

Spike in tickets issued at 119th/Halsted in May and June 2011. Nodes represent tickets grouped by week.

The Chicago Tribune published a dataset of over 4 million tickets issued to motorists for entering an intersection after the light had turned red. They analyzed the dataset and found unexplained spikes, where the number of tickets, being issued by the handfuls each day, suddenly tripled. (Download the dataset.)

I looked at the tickets issued by two of the 340 cameras. I didn’t find any spikes at Belmont/Sheridan (“400 W BELMONT”) but found a noticeable spike in May and June 2011 at the 119th Street and Halsted Street intersection (“11900 S HALSTED”).

I looked at three violations on one of the days that had an atypical number of tickets issued, May 12, 2011. Each motorist was ticketed, it appears, for turning right on red. It’s not possible, though, without watching the video, to see if the motorist rolled through the turn or indeed stopped before turning right.

The Tribune called tickets issued during these “spikes” “undeserved” but that’s hard to say without see the violations on video. The photos don’t provide enough evidence. The Tribune also reported that appeals during these spike periods were more likely to be overturned than in the period outside the spikes. The reporters discussed the possibility of malfunctions and malicious behavior, calling that an “intervention”.

The Chicago Department of Transportation, which oversees the program formerly operated by Redflex and now operated by Xerox, couldn’t refute either allegation, possibly with “service records, maintenance reports, email traffic, memos or anything else”. David Kidwell and Alex Richards report:

City transportation officials said neither the city nor Redflex made any changes to how violations were enforced. They acknowledged oversight failures and said the explosions of tickets should have been detected and resolved as they occurred. But they said that doesn’t mean the drivers weren’t breaking the law, and they defended the red light camera program overall as a safety success story. The program has generated nearly $500 million in revenue since it began in 2003.

The city was unaware of the spikes until given the evidence by the Tribune in January, said David Zavattero, a deputy director for the Chicago Department of Transportation. In the six months since, city officials have not provided any explanations.

“Trust me when I tell you that we want to know what caused these spikes you have identified as much as you do,” Zavattero said. “So far we can find no smoking gun.”

He acknowledged that faulty camera equipment likely played a role.

“I would say that is likely in some of these cases,” Zavattero said. “I cannot tell you that isn’t possible. It is possible. The old equipment was much more prone to break down than the equipment we are currently installing.”

You can download the data but you will likely produce the same results as the Tribune, but maybe a different conclusion. Their analysis has led people at all levels of the civic sphere to call for an investigation, including citizens, some of whom have filed a lawsuit, Alderman Waguespack and 19 other aldermen, and CDOT commissioner – who operates the red light camera program – Rebekah Scheinfeld.

I think they sufficiently identified a suspicious pattern. By the end of the long story, though, the Tribune didn’t prove its hypothesis that the tickets were “undeserved” or “unfair”.

In violation number 7003374335 you can see the driver of a Hyundai Santa Fe turning right at a red light. The Google Street View for this intersection shows that there is no RTOR restriction, meaning the driver is legally allowed to make a right turn here with a red light after coming to a complete stop and yielding to people in the crosswalk. But we can’t see if they stopped first. The next two violations that day at the same intersection I looked showed the same situation. (Find the violation by going to PhotoNotice and inputting 7003374335, NWD648, and CHI.)

I look forward to the investigation. The Tribune made a great start by analyzing the data and spurring the call for an investigation and it seems there’s not enough information in this dataset to explain why there are more tickets being issued.

One dataset that could help provide context – because these spikes, at least the ones that are sustained, don’t seem random – is knowing the number of vehicles passing through that intersection. The speed camera data has this information and allows one to show how different weekend traffic is from weekday traffic.

The "before" image showing the Santa Fe vehicle approaching the stop bar.

The “before” image showing the Santa Fe vehicle approaching the stop bar.

Violation photo 2

After: The Santa Fe vehicle is seen in a right turn.

Note: The Tribune identified 380 cameras but running a DISTINCT() query on the “camera name” field results in 340 values. Some cameras may have identical names because they’re at the same intersection, but you can’t discern that distinction from the dataset.

What’s up from Europe: how much is car-free when cycling on a Dutch intercity path?

June 9, 2014 / / 10 Comments

I posted this photo of Daniel riding with me from Rotterdam to Delft and Justin Haugens asked, “Was this a bike path the whole way?” and added, “[This] would be similar to my work commute.” He rides on the Chicago Lakefront Trail from Rogers Park to South Loop, but must ride off-path from Morse to Ardmore and about Monroe to Roosevelt.

Daniel lives in Rotterdam and works in Delft. The Dutch Cyclists’ Union’s (Fietsersbond) Routeplanner says the shortest path is 11.47 kilometers, or 7.12 miles. We took the short route on a Saturday, but chose the scenic route on Sunday (the day I took this photo) so Daniel could show me the airport, underground high-speed rail tracks, and various geographic features along the way.

I responded to Justin:

It was a dedicated bike path for probably 90% of the way. The thing about Dutch intercity cycle routes is that they separate cycle paths from car paths when the two modes can’t safely share. They can’t safely share when there’s a desire for moving cars quickly or moving big autos (like trucks and buses).

So, there were some points on this journey when the cycle-only path merged with a local road or a service drive [the case in that photo, actually, which you can see better here], but even then the cyclist always has priority and rarely are the junctions configured/signed so that the cyclist has to stop (not requiring the cyclist to stop is a way to make cycling a convenient mode).

In the Netherlands connectivity of bicycle-priority ways is as important as the infrastructure used. When I first visited the Netherlands, in 2010, I arrived in Amsterdam from Bremen, Germany, and rented a bike the next day. I was personally shocked that morning when I rode upon streets with conventional bike lanes (these would be the ones in door zones in the United States) on some streets.

Why was I shocked? I came to the city under the impression that all bicycle infrastructure were cycle tracks, meaning a bike path between the roadway and the sidewalk, on a level slightly above the roadway and below the sidewalk. Since then I’ve learned a lot more about why the Dutch cycle so much and how the bicycle is sometimes used more often than public transit and automobiles.

On our journey from Rotterdam to Delft we must have ridden on every kind of bicycle path the Dutch have designed. These photos sample what we encountered.

The route followed an arterial road for the first portion, but we turned off after only about a mile.

An RET metro train follows the cycle path for a portion of the route we took.

This was my favorite part of the journey to Delft: we came across a shepherd, her two sheep dogs, and her flock of sheep grazing on the bank between the cycle path and the creek.

I’m no longer in Europe but I’ve kept the title prefix, “What’s up from Europe”. Read the other posts in this series. 

Let’s get rid of beg buttons

March 9, 2014 / / 28 Comments

As much as you may believe, because you encounter them so rarely, Chicago indeed has several types of “beg buttons”. This is a mechanism wherein a person walking along a street must apply to cross another street. You are begging for permission. They are not popular, many are not even hooked up anymore, and they don’t call the pedestrian signal any sooner (their purpose is to make the green traffic signal long enough for a person to cross).

Jan Gehl et. al. succinctly demonstrate in Cities for People the opposing methods of telling a person when they can cross the street (meaning cross traffic has been halted).

The 2013 Chicago Complete Streets Design Guidelines and 2012 Pedestrian Plan reorients the city to prefer facilitating and encouraging transportation by foot over all other modes of travel.

The Pedestrian Plan says that beg buttons should have an LED light that indicates to the pusher that the button has been pushed. (The Pedestrian Plan also calls “traffic signals” a high cost pedestrian safety tool, alongside the high cost of “pedestrian hybrid beacons” and the medium cost of “rectangular rapid flash beacons”. Slow traffic, on the other hand, doesn’t have an operating cost, but it definitely has a “we’re getting there cost”.)

The Plan also says to get rid of them “except for locations where they are necessary to bring up a WALK phases for pedestrians” and without saying what makes it necessary to bring up a WALK phase (versus always having a WALK phase for that direction of traffic) and if that “necessary” is aligned with the Complete Streets Design Guidelines’ paradigm shift. Systematically removing inoperable ones is a separate, medium term milestone (alongside developing a location database).

The CSDG thankfully considers many other realities in Chicago that go against the new transportation paradigm that puts the pedestrian first. For example, it calls for the systematic removal of all slip lanes – none of which I’ve heard or seen removed in the year since CDOT created the guidelines.

Untitled

I want the city to systematically remove all beg buttons. If the green signal is too short for a person to cross the street, then it’s probably too short for a bicyclist to cross in the green signal (yes, this exists in Chicago). It also means the street is too wide to foster it being a place over being a pipe for cars. And if it’s not a place, what is it and why are people walking there? What personal needs – like a job, food, and socializing – are not being fulfilled where they live that people have to cross this road to meet those needs?

Updated March 10 at 12:56 to clarify what the Pedestrian Plan says about beg buttons.