Category: GIS

How to split a bike lane in two and copy features with QGIS

July 13, 2012 / / 0 Comments

A screenshot of the splash image seen on users with iPad retina displays in landscape mode. 

To make the Chicago Offline Bike Map, I need bikeways data. I got this from the City of Chicago’s data portal, in GIS shapefile format. It has a good attribute table listing the name of the street the bikeway is on and the bikeway’s class (see below). After several bike lanes had been installed, I asked the City’s data portal operators for an updated shapefile. I got it a month later and found that it wasn’t up-to-date. I probably could have received a shapefile with the current bikeway installations marked, but I didn’t have time to wait: every day delayed was one more day I couldn’t promote my app; I make 70 cents per sale.

Since the bikeway lines were already there, I could simply reclassify the sections that had been changed to an upgraded form of bikeway (for example, Wabash Avenue went from a door zone-style bike lane to a buffered bike lane in 2011). I tried to do this but ran into trouble when the line segment was longer than the bikeway segment that needed to be reclassified (for example, Elston Avenue has varying classifications from Milwaukee Avenue to North Avenue that didn’t match the line segments for that street). I had to divide the bikeway into shorter segments and reclassify them individually.

Enter the Split Features tool. QGIS is short on documentation and I had trouble using this feature. I eventually found the trick after a search that took more time than I expected. Here’s how to cut a line:

  1. Select the line using one of the selection tools. I prefer the default one, Select Features, where you have to click on the feature one-by-one. (It’s not required that you select the line, but doing so will ensure you only cut the selected line. If you don’t select the line, you can cut many lines in one go.)
  2. Toggle editing on the layer that contains the line you want to cut.
  3. Click Edit>Split Features to activate that tool, or find its icon in one the toolbars (which may or may not be shown).
  4. Click once near where you want to split the line.
  5. Move the cursor across the line you want to split, in the desired split location.
  6. When the red line indicating your split is where you desire, press the right-click mouse button.

Your line segment has now been split. A new entry has been added to the attribute table. There are now two entries with duplicate attributes representing that together make up the original line segment, before you split it.

This screenshot shows a red line across a road. The red line indicates where the road will be split. Press the right-click mouse button to tell QGIS to “split now”.

After splitting, open the attribute table to see that you now have two features with identical attributes. 

Copying features in QGIS

A second issue I had when creating new bikeways data was when a bikeway didn’t exist and I couldn’t reclassify it. This was the case on Franklin Boulevard: no bikeway had ever been installed there. I solved this problem by copying the relevant street segments from the Transportation (roads) shapefile and pasted them into the bikeways shapefile. New entries were created in the attribute table but with blank attributes. It was simple to fill in the street name, class, and extents.

Chicago bikeways GIS description

Bikeway classes (TYPE in the dataset) in the City of Chicago data portal are:

  1. Existing bike lane
  2. Existing marked shared lane
  3. Proposed on-street bikeway
  4. Recommended bike route
  5. Existing trail
  6. Proposed off-street trail
  7. Access path (to existing trail)
  8. Existing cycle track (also known as protected bike lane)
  9. Existing buffered bike lane

It remains to be seen if the City will identify the “enhanced marked shared lane” on Wells Street between Wacker Drive and Van Buren street differently than “existing marked shared lane” in the data.

Last minute vote on bicycle data visualization project

November 28, 2011 / / 0 Comments

The United States Department of Transportation is holding a data visualization competition and Chicago bike crash locations are one of the topics.

From Michael Carney:

I started this project because, basically, I thought it would be interesting to make a map of bike crash locations around Chicago and present it to my GIS class at UIC. Sebastian Lew and I collaborated for several months and it evolved into something more. Using ArcGIS, we were able to symbolize streets by level of overall crash intensity, calculate crashes per mile on streets, perform hot spot analysis to identify areas with high numbers of crashes, compare ridership levels with crash levels, examine temporal trends in crash activity, and perhaps most importantly, assess the effectiveness (at least at a basic level) of current bicycle infrastructure. At the very least I hope our project can help you plan a safe route to work, at the most I hope it can be used by policymakers and planners when considering how and where to expand Chicago’s bike infrastructure.

Vote today only. View the project.

Are protected bike lanes going in the right places?

September 29, 2011 / / 0 Comments
Bike crash map of Ogden, Milwaukee, Chicago

Common bike-car crash locations in West Town. The bottom blue circle identifies Ogden/Milwaukee, where there is a yellow trap for northbound, left-turning motorists (from Milwaukee to Ogden) that makes them run into southbound bicyclists who have a green light.

My contribution to a discussion on The Chainlink, Are protected bike lanes going in the right places?

Kelvin, Milwaukee/Ogden/Chicago is the intersection along Milwaukee Avenue with the highest number of bicycle crashes. I created this table and map to show them, using data from 2007-2009.

The blue rings on the map are called, in GIS parlance, “buffers” and are circles used to select things (in this case, bike crashes) within a certain distance of the circle center. In this map I used 50 feet radius buffers (100 feet diameter). While this distance encompasses the intersection from center to all four curbs, it doesn’t encompass the crashes that happened just outside the buffer that were still most likely influenced by the intersection (like drivers’ turning movements).

I am working on a project with three friends to create a better map and “crash browser”. I mentioned it in the last story on Grid Chicago in this post. For this project, we are using 200 feet radius (400 feet diameter) buffers to ensure we encompass the entire intersection and the area in which it still has an effect. This also grabs the bike lane “pinch points”, places where a bike lane doesn’t start until 100-200 feet beyond the intersection.

I am also concerned with the strategy and approach CDOT is using to choose locations. It’s not transparent; at MBAC, CDOT said they were choosing locations “without controversy and that could be implemented quickly”.

Read more about Kinzie Street, Chicago’s first protected bike lane, and my other thoughts on protected bike lanes. 

How to upload shapefiles to Google Fusion Tables

September 25, 2011 / / 0 Comments

It is now possible to upload a shapefile (and its companion files SHX, PRJ, and DBF) to Google Fusion Tables (GFT).

Before we go any further, keep in mind that the application that does this will only process 100,000 rows. Additionally, GFT only gives each user 200 MB of storage (and they don’t tell you your current status, that I can see).

  1. Login to your Google account (at Gmail, or at GFT).
  2. Prepare your data. Ensure it has fewer than 100,000 rows.
  3. ZIP up your dataX.shp, dataX.shx, dataX.prj, and dataX.dbf. Use WinZip for Windows, or for Mac, right-click the selection of files and select “Compress 4 items”.
  4. Visit the Shape to Fusion website. You will have to authorize the web application to “grant access” to your GFT tables. It needs this access so that after the web application processes your data, it can insert it into GFT.
  5. If you want a Centroid Geometry column or a Simplified Geometry column added, click “Advanced Options” and check their checkboxes – see notes below for an explanation.
  6. Choose the file to upload and click Upload.
  7. Leave the window open until it says it has processed all of the rows. It will report “Processed Y rows and inserted Y rows”. You will be given a link to the GFT the web application created.

Sample Data

If you’re looking to give this a try and see results quickly, try some sample data from the City of Chicago data portal:

Notes

I had trouble many times while using Shape to Fusion in that after I chose the file to upload and clicked Upload, I had to grant access to the web application again and start over (choose the file and click Upload a second time).

Centroid Geometry – This creates a column with the geographic coordinates of the centroid in a polygon. It lists it in the original projection system. So if your projection is in feet, the value will be in feet. This is a function that can easily be performed in free and open source QGIS, where you can also reproject files to get latitude and longitude values (in WGS84 project, EPSG 4326). The centroid value is surrounded in the field by KML syntax “<Point><coordinates>X,Y</coordinates></Point>”.

Simplified Geometry – A geometry column is automatically created by the web application (or GFT, I’m not sure). This function will create a simpler version of that geometry, with fewer lines and vertices. It also creates columns to list the vertices count for the simple and regular geometry columns.

My essential QGIS plugins

April 18, 2011 / / 0 Comments

Plugins for QGIS I use most often.

All of these can be installed automatically by QGIS. Click on Plugins>Fetch Python Plugins. Then search for the plugin, click on its name, and click Install Plugin. Few plugins require a restart.

  • MMQGIS – Great for working with CSV files; also merges layers (even if they have differing attributes); has various other useful functions, including converting string data to float data. Has Voronoi diagram function (takes a long time to process).
  • fTools – Replicates some of the most basic geographic tools in ArcGIS, like Clip, Dissolve, and Reproject. Can also add X/Y values to point attribute tables that are missing them (if you want latitude/longitude, you must reproject into a coordinate reference system first, like WGS84 [EPSG: 4326]). Unfortunately, there’s little information on what each fTools function does. Below are descriptions:
    • Extract Nodes – Create a point at each intersection of vertices.
    • Basic Statistics – Generate arithmetic statistics for fields, same as statistics function in ArcGIS. Great for quickly understanding the extent of values in a field (especially numeric values), like mean, max, min, standard deviation, and number of unique values.
    • Nearest Neighbour Analysis – More details here.
    • Geoprocessing Tools>Dissolve – Combine features based on a shared attribute. For example, all features with an identical STREET_TYPE be combined into a single feature. For example, all “Avenues” will become one feature and all “Boulevards” will become a second feature. Only works on polygon layers.
    • Descrição em português
  • Table Manager
  • Open Layers – Embed Google, Yahoo, Bing, and OpenStreetMap layers in your map. See my example.