Category: Information

Jefferson Park station renovation highlights train station planning deficiencies

February 5, 2015 / / 9 Comments
Jefferson Park train station rendering

Jefferson Park train station rendering from the City of Chicago. The only difference you see is canopies. What you don’t see is a walkable connection ut thisetween shops southeast of here and the train station – they’re separated by a strip of parking.

Plans for the renovation of the Jefferson Park CTA station are illustrative of the City’s failure to think deeply about how to design the projects that is funding in a way that maximizes potential for residential and commercial development around train stations.

The changes proposed for one of Chicagoland’s most important transit centers are weak. There’s no development plan, or any kind of neighborhood plan or “Corridor Development Initiative” for the Jefferson Park transit center.

Current city policy identifies train stations as optimal places to build new housing and commercial uses.

Without challenging the design to respond to this policy the transit center will continue to use neighborhood space inefficiently and doesn’t respond to demands from residents to improve pedestrian and bicyclist safety and increase economic development.

Judging by the renderings, nothing is changing at the Jefferson Park Blue Line station (4917 N Milwaukee Ave). All of the improvements save for the canopy are invisible in this rendering. The CTA’s list of improvements reads like the superficial makeover that many stations got in the Station Renewal program almost three years ago, a stopgap measure until Your New Blue could begin.

There will be LED lighting, new paint, new escalators and stairs, new paving, and a new canopy. Only a few of those things make the station easier to access and use.

Jefferson Park is a major asset to the neighborhood and the city. The station serves CTA trains, Metra trains, CTA buses, and Pace buses to Chicago’s suburbs. The CTA’s September 2014 ridership report [PDF] said there are an average of 7,420 people boarding the Blue Line here each weekday, a 0.1% increase over September 2013. It’s the busiest Blue Line station outside of the Loop and O’Hare airport.*

On Twitter I said that the station should be surrounded by buildings, not bus bays. I’m not familiar with how many routes and buses use the station daily, and I’m not suggesting that space for buses go away. I’m challenging the Chicago Transit Authority and Mayor Rahm Emanuel to come up with a better plan for vehicle and pedestrian movements, and to start welcoming new development.

I pointed out the new Wiehle-Reston Silver Line station in Virginia where a residential building was constructed atop a bus bay (where I transferred from the Washington Flyer bus from Dulles). A plaza connects the bus bay to and apartment lobby and the Metrorail station.

Bus bays under an apartment building in Reston

The bus bay at the Wiehle-Reston Silver Line station in Reston, Virginia, is under an apartment building and plaza linking it to the Metrorail station.

The Metropolitan Planning Council conducted a consultation for the Logan Square Blue Line station – Your New Blue will make upgrades here, too – and the next door city-owned parking lot. Their consultation involved 700 people to decide what development at this station should look like. Their desires were pretty specific: there should be affordable housing, but not any higher than six stories.

The current policy, enacted as an ordinance and expressed in other city documents, allows developers to build more units in the same plot and save them and their tenants money by building less parking. But this policy is insufficient in that has no design review or public consultation attached. It also provides no zoning recommendations to expand the number of places to which it can apply.

A development plan, for which the CDI serves as a good, starting model, would bring residents – and people who want to live in the neighborhood – to discussions about if and how the neighborhood should change. It would hook into another city proposal, from the Chicago Department of Transportation, to build protected bike lanes on Milwaukee, but which ultimately failed. The process would probably uncover latent demand to build new housing in the neighborhood that’s stymied by incompatible zoning.**

The city’s recent choices for development and (lack of) urban design at this station as well as across from the Halsted Green Line station in Englewood where the city is selling vacant land to build a Whole Foods-anchored strip mall demonstrates how little deliberation there is in maximizing transit-oriented development, or TOD.

Their suburban forms are the antithesis of how we should be designing the stations and their environs – they should have higher densities and walkable places.

* Metra has published its 2014 station-level counts! This station had 599 daily boardings, yet not every train stops here. The Union Pacific Northwest (UP-NW) line that stops at Jefferson Park saw a 3.8% increase in ridership [PDF] from January to September 2014 versus the same period in 2013.

** There are no parcels near the Jefferson Park transit center that allow the transit-adjacent development ordinance to take effect; developers have to go through an arduous and sometimes costly process to persuade the alderman to change the zoning. The ordinance only affects Bx-3 districts (where x is 1-3 and -3 is the allowable density identifier).

Links between Emanuel’s campaign donors and their building projects

February 1, 2015 / / 1 Comment

The Tribune called out Emanuel’s appearance at a press conference as an endorsement of a locally-designed skyscraper (Studio Gang and bKL Architecture) to be built by Wanda, a Chinese development company – it has yet to receive any approval. Photo: Ted Cox, DNAinfo.

The Chicago Tribune reviewed the campaign contributions of Mayor Rahm Emanuel’s top donors and linked each donor to how it does business with Emanuel or the city. The article overall discussed how easy it is for Rahm to raise more money than what’s probably necessary to be elected a second time.

The Tribune graciously provided this data as a simple table which I’ve republished here in order to add links to building permit information from Chicago Cityscape. The website I’ve developed lists company and person names in an immediately searchable form. Currently there are over 90,000 companies, architects, and property owners that have received a building permit since 2010. Use the Illinois Sunshine database to find out who’s contributing to whom in the Chicago election.

Note: You’ll see “listed under [many] names” for several companies; this indicates that the Chicago building permit database uses different spellings, or the company has changed their name.

[table id=1 /]

Neither the article nor this table are meant to indicate any wrongdoing – campaign donations are public and it’s common to receive them from companies that do business in Chicago. It’s the extent that the donation appears to pay for favors or favoritism over other donors (which may be competing companies), or what’s right, that determines when immorality becomes an issue (a connection that’s hard to demonstrate).

Anti-traffic safety is now a political platform

January 13, 2015 / / 5 Comments

Three of the five men running for Mayor of Chicago have pledged to eliminate enforcing red light running with cameras. Many aldermen have done the same. The Chicago Tribune has factually pointed out that Mayors Daley and Emanuel have mismanaged the red light camera program, with the bulk of it falling upon staff in the Daley administration. (The only part of the program under Emanuel that could be considered mismanagement was changing the business rules to issue tickets when the yellow light was recorded as 2.90 to 2.99 seconds long; Emanuel’s administration changed the rule back and has implemented many other changes following the inspector general’s report.)

Red light cameras lead to an increase in rear-end crashes but decrease the more severe angle (T-bone) crashes, which the Chicago Tribune “sorta” pointed out when it looked at frequencies but not injury costs.

Current 2nd ward Alderman Bob Fioretti, Cook County commissioner Jesus “Chuy’ Garcia, William “Dock” Walls, and Willie Wilson all have decided that neither the facts nor safety for people inside and outside of multi-ton machines are important. They are supporting the right to endanger others by respecting the inconvenience of not always being prepared to stop at a traffic signal.

Fioretti has said he will introduce soon an ordinance to remove red light cameras by April, but I haven’t found it in the legislation database.

Even though Streetsblog Chicago is no longer publishing, John Greenfield is hustling to get us both working again. In the meantime I intend to cover parts of the election, which takes place February 24, with assistance.

Working with ZIP code data (and alternatives to using sketchy ZIP code data)

December 17, 2014 / / 5 Comments
1711 North Kimball Avenue, built 1890

This building at 1711 N Kimball no longer receives mail and the local mail carrier would mark it as vacant. After a minimum length of time the address will appear in the United States Postal Service’s vacancy dataset, provided by the federal Department of Housing and Urban Development. Photo: Gabriel X. Michael.

Working with accurate ZIP code data in your geographic publication (website or report) or demographic analysis can be problematic. The most accurate dataset – perhaps the only one that could be called reliably accurate – is one that you purchase from one of the United States Postal Service’s (USPS) authorized resellers. If you want to skip the introduction on what ZIP codes really represent, jump to “ZIP-code related datasets”.

Understanding what ZIP codes are

In other words the post office’s ZIP code data, which they use to deliver mail and not to locate people like your publication or analysis, is not free. It is also, unbeknownst to many, a dataset that lists mail carrier routes. It’s not a boundary or polygon, although many of the authorized resellers transform it into a boundary so buyers can geocode the location of their customers (retail companies might use this for customer tracking and profiling, and petition-creating websites for determining your elected officials).

The Census Bureau has its own issues using ZIP code data. For one, the ZIP code data changes as routes change and as delivery points change. Census boundaries needs to stay somewhat constant to be able to compare geographies over time, and Census tracts stay the same for a period of 10 years (between the decennial surveys).

Understanding that ZIP codes are well known (everybody has one and everybody knows theirs) and that it would be useful to present data on that level, the Bureau created “ZIP Code Tabulation Areas” (ZCTA) for the 2000 Census. They’re a collection of Census tracts that resemble a ZIP code’s area (they also often share the same 5-digit identifiers). The ZCTA and an area representing a ZIP code have a lot of overlap and can share much of the same space. ZCTA data is freely downloadable from the Census Bureau’s TIGER shapefiles website.

There’s a good discussion about what ZIP codes are and aren’t on the GIS StackExchange.

Chicago example of the problem

Here’s a real world example of the kinds of problems that ZIP code data availability and comprehension: Those working on the Chicago Health Atlas have run into this problem where they were using two different datasets: ZCTA from the Census Bureau and ZIP codes as prepared by the City of Chicago and published on their open data portal. Their solution, which is really a stopgap measure and needs further review not just by those involved in the app but by a diverse group of data experts, was to add a disclaimer that they use ZCTAs instead of the USPS’s ZIP code data.

ZIP-code related datasets

Fast forward to why I’m telling you all of this: The U.S. Department of Housing and Urban Development (HUD) has two ZIP-code based datasets that may prove useful to mappers and researchers.

1. ZIP code crosswalk files

This is a collection of eight datasets that link a level of Census geography to ZIP codes (and the reverse). The most useful to me is ZIP to Census tract. This dataset tells you in which ZIP code a Census tract lies (including if it spans multiple ZIP codes). HUD is using data from the USPS to create this.

The dataset is documented well on their website and updated quarterly, going back to 2010. The most recent file comes as a 12 MB Excel spreadsheet.

2. Vacant addresses

The USPS employs thousands of mail carriers to delivery things to the millions of households across the country, and they keep track of when the mail carrier cannot delivery something because no one lives in the apartment or house anymore. The address vacancy data tells you the following characteristics at the Census tract level:

  • total number of addresses the USPS knows about
  • number of addresses on urban routes to which the mail carrier hasn’t been able to delivery for 90 days and longer
  • “no-stat” addresses: undeliverable rural addresses, places under construction, urban addresses unlikely to be active

You must register to download the vacant addresses data and be a governmental entity or non-profit organization*, per the agreement** HUD has with USPS. Learn more and download the vacancy data which they update quarterly.

Tina Fassett Smith is a researcher at DePaul University’s Institute of Housing Studies and reviewed part of this blog post. She stresses to readers to ignore the “no-stat” addresses in the USPS’s vacancy dataset. She said that research by her and her colleagues at the IHS concluded this section of the data is unreliable. Tina also said that the methodology mail carriers use to identify vacant addresses and places under change (construction or demolition) isn’t made public and that mail carriers have an incentive to collect the data instead of being compensated normally. Tina further explained the issues with no-stat.

We have seen instances of a relationship between the number of P.O. boxes (i.e., the presence of a post office) and the number of no-stats in an area. This is one reason we took it off of the IHS Data Portal. We have not found it to be a useful data set for better understanding neighborhoods or housing markets.

The Institute of Housing Studies provides vacancy data on their portal for those who don’t want to bother with the HUD sign-up process to obtain it.

* It appears that HUD doesn’t verify your eligibility.

** This agreement also states that one can only use the vacancy data for the “stated purpose”: “measuring and forecasting neighborhood changes, assessing neighborhood needs, and measuring/assessing the various HUD programs in which Users are involved”.

I’ve got property tax data for Chicago Cityscape

September 28, 2014 / / 0 Comments
Wrigley Field Ahead of a Seemingless Meaningless Game, September 2011

Wrigley Field is an old baseball stadium in Chicago’s Lakeview neighborhood. Photo by Dan X. O’Neil

1. Licensed Chicago Contractors, my website that tracks what developers and the city are proposing to build or demolish in your neighborhood, is now called Chicago Cityscape.

2. I’m grateful to Ian Dees who helped me get property tax data for 2009-2013 for over 1.4 million PINs (property identification numbers) in Cook County.

I’m going through various parts of the property tax data and figuring out how to integrate it with Chicago Cityscape. The first time Ian got the data I found out I didn’t tell him to get the right PINs. I think I’ve fixed that now.

As part of this process I’m checking properties somewhat randomly, based on the permits I’m browsing. I most recently viewed a Wrigley Field building permit at 1060 W Addison Street – for a Zac Brown concert – so I searched its PIN and how much the property is “worth”. Here goes:

Year Amount Billed Assessed Value
2013 $1,517,665.09 $8,049,996
2012 1,498,971.03 8,049,996
2011 1,493,002.47 8,865,636
2010 1,489,160.89 8,865,636
2009 1,360,673.45 10,613,423

Notice how the assessed value dropped over $2 million from 2009 to 2010. And even though it had three unique assessed values, the annually changing tax rate adjusted the amount billed. You can see this information on the Cook County Property Info portal.