Category: News

SAFETEA-LU extensions, explained

Why does Congress keep extending SAFETEA-LU?

SAFETEA-LU expired on September 30, 2009, but President Obama signed a 31-day extension on October 1, 2009. This is the same day the federal budget expired, and the extension, called a continuing resolution, also included funding for nearly all federal agencies to continue their work at current funding levels. The extension bill is H.R. 2918 (public law 111-68).

It’s now November 17, 2009, and what happened to that extension that expired on Halloween? A new bill was signed by the president (on October 30) that makes another extension, this time lasting until December 18, 2009. This extension is buried within H.R. 2996 (public law 111-88). Read the bill and you won’t find any explicit language that extends transportation funding.

Larry Ehl at the Washington (state) Department of Transportation (WashDOT) breaks down how to read between the lines to understand the text necessary to extend SAFETEA-LU. Essentially, H.R. 2996 modifies H.R. 2918. Subscribe to WashDOT’s Federal Transportation Issues blog to stay apprised.

Find bill text at Thomas, an online repository from the Library of Congress.

World photographic tour

Grab your laptop and fall comfortably into your first class couch or easy chair and load up my first world photographic tour.

Flickr is a goldmine of the best photos on earth. Find photos of anything and everything. Learn about far off and not so far off places. With World Tour #1, learn about new transportation developments in Dubai, flashy architecture in England and Spain, and stacked infrastructure in Japan. But our tour won’t be all ritz and glamor. See moveable bridges in Chicago and protected bike lanes in New York City.

See all 15 photos in my World Tour #1 gallery on Flickr, or start the tour below.

Let’s begin!

Spaceship architecture from starchitect Santiago Calatrava. The first building at City of Arts and Sciences, a planetarium, was constructed in 1998. Location: Valencia, Spain. Photo by: Guidotoni58.

Motorists can’t turn at this intersection. Probably to reduce traffic congestion and to accommodate pedestrians. Also notice the enormous stores from luxury goods brands Giorgio Armani and Louis Vuitton. Location: Hong Kong (SAR China). Photo by: PSeangsong.

New train line and rolling stock intended for 2012 Olympics use. 29 trains with 6 cars each. Travels between St. Pancras and Ebbsfleet stations. (I don’t understand the divisions of England and greater London; I decided it would be easier to list the terminals instead of cities or villages.) Location: Greater London, England. Photo by: Fugu ツ.

See 12 more photos and descriptions in my World Tour #1 gallery on Flickr. My favorite photo is the final one, showing an elevated intersection just for pedestrians (similar to what you might see in Las Vegas, Nevada, or any Asian city with a few million residents).

Motoring is triple threat to bicycling and the environment

Location: Northwest corner of Clark Street and Congress Parkway.

This photo shows the damage that automobiles inflict on our cities, environment, and, closest to my heart, bikes and bike parking.

An errant motorist jumped the curb and crashed first into the tree, then the bike rack, and finally the bike parked here. The LaSalle Blue Line station entrance is just steps away (in the background). Imagine the fate of a bicyclist who might have been locking their red Schwinn road bike to the bike rack only to find a 2-ton metal box hurtling in their direction. This photo makes clear how driving is a threat to so many aspects of our streets.

The collision had a direct monetary cost. The city will most likely pick up the tab for everything except replacing the bike. Here’s what I surmise from the photographed scene:

  • Tree removal and replacement: >$1,000
  • Bike rack removal and replacement: $450 ($300 for a new one, $150 to remove)
  • Vintage Schwinn: $200
  • Bike removal: $50
  • Cleanup: $150
  • Total: At least $1,850

Please drive carefully. Send me your photos of the automobile imposition – reader updates are here. But wait, I’ve encountered this again and again:

Location: Northwest corner of Elton Avenue and Cicero Avenue.

Location: Northwest corner of Lawrence Avenue and Kostner Avenue in front of Chicago Public Library, Mayfair branch.

UPDATE: Thanks for the mention, BikePortland.

Pollution fighting bike lane, coming soon to Pilsen

Rendering of the project by CDOT. See all photos about this project.

A planner from the Streetscape and Sustainable Design Program in the Chicago Department of Transportation (CDOT) came to speak to my Sustainable Development Techniques class at UIC about adding “green” to urban design.

Among other topics, he talked about CDOT’s streetscape project for Cermak and Blue Island in Pilsen, a near southwest side neighborhood a couple miles outside of downtown Chicago. The project, like all streetscapes, is one of economic development. But this project is unique in that the goal was to look at every element and make each as green and sustainable as possible.

You can read about the project through the Program’s presentation here (Flash slideshow). Please note there are many versions of the same presentation on the web and each my be different depending on their intended audience.

I will be discussing a single showcase element from the project: A bike lane on Blue Island between Ashland and Western where currently one does not exist. The bike lane and the adjacent parking lane (on the bike lane’s right side, as normal in Chicago) will be constructed with permeable pavers mixed with smog eating concrete. Wait? Smog eating concrete? Keep reading!

The bike lane will begin at Ashland/Cermak/Blue Island, a well-traveled intersection for heavy trucks, three bus routes, and many passenger cars. The bike lane will connect Pilsen to Little Village and extend the existing bike lane on Blue Island in Pilsen’s central shopping area. This segment is also a designated truck route and to safely accommodate the parking lane, bike lane, and travel lane, the road will be widened by reducing the width of the sidewalks. The sidewalks here are 20 feet wide, double the standard width, and four times wider than sidewalks in many parts of Chicago. There’s very low pedestrian volume here and very little residential use so the plan is to have 8 foot wide sidewalks, and a 5.5 foot planter, breaking occasionally for bus stop shelters.

The bike lane will be 5 feet wide (including striping) and the parking lane will be 8 feet wide. The novel part of the two lanes is that they will be made with permeable pavers.

This will be the first paver bike lane in the City of Chicago. The blocks will be oriented so that bicyclists feel the least amount of bumps and won’t get their tire stuck in a groove that could harm.

The smog eating concrete’s trade name is TX Active, invented by Italcementi Group, a large, multinational corporation founded and based in Italy. Since the original installation of TX Active cement on the Dives in Misericordia Church in Rome (designed by Richard Meier), Italcementi has developed two lines of photocatalytic cement, only one of which reduces pollutants in the area (TX Arca). The other cement is for architectural uses helps keep the concrete surface clean from dirt and particulate matter.

CDOT will use the second line, TX Aria, in the top half inch of the pavers. The company has tested the product to demonstrate its effectiveness at reducing the presence of Nitrogen Oxides (commonly written as NOx, a family of toxic substances emitted by internal combustion engines) and published its laboratory results in an easy to follow report on its website (PDF). The technical report goes into more details and explains how the process works (through photocatalysis) and what substances their product can be designed to diminish. The technical report is unclear on whether or not all forms of the TX Active product abate all substances. It may be that the maker only tested its effects on Nitrogen Oxides levels.

I look forward to watching the construction progress and to breathing the cleaner air while bicycling to a new destination in Pilsen.

A LEED-related homework assignment and my response

The assignment: Write a mock letter to the editor responding to this New York Times article: Some Buildings Not Living Up to Green Label (published August 31, 2009).

The class: Sustainable Development Techniques

How the class works: The professors invite working professionals to speak to the class each week. After the lecture from these guests, a short discussion ensues. The guests design the homework questions. The following week, the class discusses their responses with each other and the professors.

Dear Editor,

Buildings, as a category, consume more energy than any other category in the United States. The USGBC: U.S. Green Building Council (GBC) took the right steps by mandating an energy efficiency minimum to receive LEED certification. As it increases the standard building designers and owners need to reach to achieve the image of “green” or environmental responsibility, we should look for ways to make green building design cheaper and easier.

I have a few suggestions for how we can make that happen, but first I want to encourage your newspaper and its readers to send a message to their Congresspersons: They should pay attention to the fact that buildings consume the most energy of any category of energy use and include a section in climate change legislation that reduces buildings’ impact on the environment and their contribution to greenhouse gas emissions. Climate change legislation will not be effective unless it mandates and encourages changes in buildings and how they use energy.

So how can we make LEED certification (or other similar certification programs) easier to achieve? First of all, do not reduce the ease of certification. This will have an ill effect on climate change and reverse the positive advances LEED and its certified buildings make.

  1. Certify buildings who meet the minimum energy efficiency requirements with a new label. Some building owners or developers may not care to receive full certification or medal, or create green roofs or offer alternative transportation to building workers, but would rather be recognized for making bona fide improvements to their energy systems and use. Hold the buildings to the same reporting standards as all other certification levels.
  2. Support and fund research that will be used to continually refine the certification process and identify the best and worst energy system changes and upgrades. The Center for Neighborhood Technology and the New Buildings Institute have researched LEED-certified buildings to gauge their energy use and determine how effective the buildings are in reducing energy use (not all buildings were able to reduce energy use).
  3. Offer short-term rewards when people make long-term changes that provide long-term benefits. Provide instant or near-instant tax rebates when residents who live in or own “energy poor” buildings and make upgrades that are proven to increase the building’s energy efficiency by a minimum amount. When people can see immediate benefits, they may be more likely to make the changes. Make the rebate requirements easy to understand – consult with retailers like CVS and Walgreens who provide some rebates immediately to their customers after a purchase is made. However, consult the best universities and researchers to ensure the program managing this system will not allow rebates for window installation when home insulation negates any positive effect the new windows would provide.
  4. Continue to provide support and funding for “green jobs” that will further these legislated programs. Jobs like researchers, product development, engineering; also, new jobs like “energy efficiency inspector” and consultant.
  5. Mandate programs that reduce the Top 10 energy wasters in offices so that individual workers must play a part in their building’s energy reduction. This might mean automatic computer suspension overnight and on the weekends, or eliminating paper intensive processes, or installing automatic hand dryers and lights. These programs should apply to every building with at least 10 workers. Be imaginative, though, to work around corporate resistance; perhaps a cap & trade element would satisfy some building lessees.

Please continue writing about this issue. I want all workers to be aware of how they use energy and contribute to their building’s energy use and how it relates to carbon emissions.

-Steven Vance

I believe that most letters to the editor are written in mind for the newspaper’s other readers. Many letters to the editor are indeed directed at the editor, the article author, or the newspaper as a company. I chose to write my letter in the former style because if I was going to be published where 800,000 people might read what I wrote, I want it to be something they will find interesting and can have a personal response.

Why did I write what I did? Two LEED experts at Center for Neighborhood Technology in Chicago, Illinois, came to speak to my class about their research project that analyzes energy and water usage for 27 LEED-certified buildings in Illinois (find buildings on the USGBC’s website). The twofold purpose is to provide a report back to the study participants about their consumption, but also point out exactly what the NYT article mentioned: there’s a disparity between LEED certification and energy efficiency. Should LEED standards be more stringent about energy reduction (for existing buildings) or efficiency (for new buildings compared to other buildings in its class)?

It turns out that U.S. Green Buildings Council will soon require that new buildings must meet a certain minimum number of points in the Energy Efficiency category. I agree with this change, and my suggestions in my letter to the editor complement that change and encourage making energy efficiency easier and something that individual homeowners and workers will take part in.